Working Process





Working Principle

Sounds collected through a microphone are processed with digital signals and expressed with sampled signals and data to create a function only for wave packets. Data made of wave packets functions are sent to MCU via serial communication and start the motor, thus causing objects and light movements to express themselves in diverse forms.



Operation Explanation

Visitors can express sound in their voices with a microphone located at the exhibition.

Their sound operates the works, whose movements change their waveforms (shapes of waves) according to the voices of visitors and noises in the surroundings.

[The movements of objects are determined by the sound entered through the microphone and then sampled. Movements are made only at the baseline of sound or higher. The movements of objects differ according to sound.]



Mechanical Device Designed for the Project

A device for up and down movements was made by a crank device called the scotch yoke. A wooden disc was fixed onto the motor shaft (central axis) for wheel-like rolling. Attached to the outside of the disc was a fixation device. An oval-shaped wire that was horizontally long was laser processed and connected (welded) to a pipe at the upper and lower center. Another fixation device was used to connect the oval shape with the disc. The pipe had a bearing device attached at the upper and lower section so that it could move up and down in a flexible motion. LED lights were attached at the upper part of the pipe to connect the spheres that represented the image of flexibly moving elementary particles. Stretchy spring wire was used for stability even during movements to prevent the abrasion of wire coating, which was essential to lighting up LED in a device subject to plenty of movements.


댓글 없음:

댓글 쓰기

홈